Unlock Huawei E-1732 Idea Permanently

Hi friend All of trick fails to unlock idea net-setter huawei e1732.last me find out working trick for idea e1732. so here is a new method it works 100%. before doing this trick you have lack of peaceful mind,because steps are too long and you need some software's to do this.May be your antivirus says its virus & block your downloads so disable it.

Step by step guide to unlocking huawei e1732 idea netsetter proper :-

1. Download CDMA workshop v 2.7.0.& open( Disable antivirus )
2. Download Huawei E1732 Downgrader Firmware
3. Insert an Unwanted Sim to your huawei e1732 netsetter.
4. Find the Proper port your huawei e1732 modem is connected.

You can do these step :-

• Right click on your My Computer –>> Manage –>> Device Manager –>> Ports (COM & LPT) –>> HUAWEI Mobile Connect – 3G Application Interface(COM [The port number appear in your system] )
• Note the com port number into which your huawei e1732 idea netsetter modem is connected.
• Run CDMA Workshop v2.7.0.exe ( check antivirus Disabled )
• Select the Port that you noted from your Device Manager under the port option in COM Settings (AT mode) under the Main tab.
• Click on connect then again click on read.
• Go to the Security tab –>> Type 000000 in the blank box under SPC –>> Click on SPC button –>> Click on Send with Default (nv_read) as SPC.
• Click Memory tab –>> NV Items –>> Read –>> Now a Conform box will appear –>> Click OK –>> Now NV Items Backup box will appear –>> In the box straight to Last NV Item type 9999 –>> Click OK –>> Save the file by giving a file name you like (Eg: E1732Unlock etc.)
• When the buffer reach 100% your file is saved successfully.Now a Information box will appear –>> Click OK  –>> Minimize CDMA Workshop v2.7.0
• Run E1732 Downgrader  "I accept the agreement" –>> Next –>> wait for a few second until the search for your modem finishes –>> (Don’t mark Auto remove the device after update ) Next –>> (Don’t unplug data card while process is not finish) –>> Start –>> At the end of Downloading Programs.. you will get a Update Failure! error dialog box (Don't Worry & Think Bad) –>> Click OK –>> Click Finish
• Restore CDMA Workshop v2.7.0 –>> Main tab –>> Disconnet.
• Unplug your  Net setter (Modem) from your computer.
• Again Plug it to the Computer –>> Check the Port again from the Device Manager
• Go to “CDMA Workshop v2.7.0” select the Port that you noted from your Device Manager under the Port option in COM Settings (AT mode) under the “Main”tab as we did before –>> Click on Connect –>> Memory tab –>> NV Items –>> Click on Write –>> A Confirm box  will appear –>> Click OK –>> Open dialog box will appear –>> Open the file that  you  saved  before –>> When the buffer reach 100% a Information dialog box appears with a success message –>> Click OK –>> Main tab –>> Disconnect.
• Now close CDMA Workshop v2.7.0 –>> A Confirm dialogue box will appear –>> Click NO .
• Close everything –>> Enable your Antivirus..
• Yes got it. Your Net setter E1732 unlocked successfully.
• Unplug Net setter & again plug in from your computer wait for Net setter starts.
• Put an SIM Card other than IDEA to the Netsetter If it shows “The SIM/USIMcard not been detected or is invalid” (Don't Worry) –>> Click “OK” –>> Wait for the SIM card to be detect the SIM card and enjoy browsing with detected –>> Now any other SIM.  
• Make new mobile APN settings you can download huawei mobile partner. read and download mobile partner from this page.
• Having problem while connecting to internet with other sim cards now you can connect by any sim card with default IDEA net Setter Dashboard using these steps...
• If Modem is detecting sim cards and you gets errors then do this

For Windows XP

Control Panel –>> Phone and Modem(if don't shows control panel click classic view) –>> modem tab –>> huawei mobile connect 3g modem (which is present on COM –>> properties advance –>> in extra initializing command use given commands and click OK

For Windows 7

Start menu –>> type phone and modem –>> click on it –>> modems –>> huawei mobile connect 3g modem –>> properties –>> change settings –>> advance –>> extra initialization command –>> use given command..
If ask Country & area code ?...
Country – India
Area Code – 91
Leave other blank

You May Like More :-

1. Fact Regarding Unlocking Idea Huawei E1732 7.2mbps Model
2. Unlocking IDEA 3G NetSetter Huawei E1732 (100% working)
3. Idea Huawei 3G E1550 NetSetter Bsnl/Docomo 619 Error Problem Solved
4. Unlock Idea E-1550 3g NetSetter With This Tutorial (Screen Shots Included)
5. Unlock Idea Netsetter Huawei E162G without any software
6. Flash Idea Netsetter 2G Huawei E162G Modem
7. Idea Netsetter Huawei E1732 Error IMEI Solution
8. Huawei E1732 Very Simple Unlocking Free
9. How to Unlock Idea NetSetter 3G Huawei E1550
10. Apn Settings for Mobile Internet USB Modem Dashboard