ZTE MF28B, MF28D, MF28G detect and unlock guide

VERY IMPORTANT: Connect router to PC via LAN cable and wait for at least

• Launch software - right click on program icon and select "run as administrator"

• Open Models tab and select MF28. Read provided information on the program

• To detect router, manually configure adapter IP to which router is connected to, set it to 192.168.32.120 like shown in picture below. During manual IP entry leave Subnet Mask and Default Gateway fields empty. If detection does not work, then enter Subnet Mask and Default Gateway manually

• Open "Advanced settings" tab and click "Refresh list" button

• Select router's network adapter from the list and click "Connect to router"

• Wait for device to be fully detected



• Open User Account data tab, enter your username and password that you received after credits purchase. Click "Check account status", (you can buy credits here www.dc-unlocker.com/buy).
• If DC-Unlocker/Vygis/Rocker/Infinity dongle is connected, only click "Check account status"

• Proceed to "Unlocking" tab and click "Unlock"  button

• Wait for router to be unlocked

• After message appears that unlock was finished, click "Router info" device will be detected now as unlocked

• To complete unlocking click "Disconnect router" and restart device like suggested on the program

Download ZTE Routers Unlocker

You May Like More :-

1. Firmware not supported for ZTE T303
2. Unlock K3772 Vodafone Ghana Huawei Modem / DataCard / Dongle Free Instructions
3. How to unlock MF825 Bolt with dc-unlocker program
4. How to Openline / Unlock ZTE MF65M, MF65+, MF63, MF93D, MF910L Pocket Wifi
5. How to Unlock ZTE MF 190 / MF180 / MF110 / MF673u
6. ZTE MF90 uFi LTE 4G Mobile Hotspot Device
7. 25 DBI TS9 LTE 4G External Antenna Boostor
8. Unlock ZTE MF70 Modem Using DC-Unlocker Software
9. ZTE Device battery indicator, network adapter missing repair
10. Download DC-Unlocker - ZTE Icera Unlocker client v.1.0026